Description
| Protection Class | IP67 | |
|---|---|---|
| Mechanical Lifespan | over 500,000 times | |
| Electrical Lifespan | over 100,000 times | |
| Allowable Operating Frequency | Mechanical | 120 times/min |
| Electrical | 30 times/min | |
| Insulation Resistance | over 100MΩ (DC 500V) | |
| Contact Resistance | under 50mΩ | |
| withstand voltage | between non-continuous terminal | AC1000V (50/60Hz per 1 min) |
| between each terminal and non-conducting metal part | AC2000V (50/60Hz per 1 min) | |
| shock resistance | durability | about 1000m/s²(100G) |
| malfunction | about 250m/s²(25G) | |
| vibration | 10-55Hz double amplitude 1.5mm | |
| ambient operating-temperature range | – 10~+55℃ | |
| ambient operating-humidity range | 45~85% RH | |
Operating characteristics
- OF max.g : 1,300
- RF min.g : 210
- PT : 15˚ ± 5˚
- MD max : 5˚
- TT min : 70˚
Weight
SLP2130-ALabout 0.52 Kg
Wiring
- The size allowance not indicated on the above is ±0.4mm.
- In case the product is installed outdoor or for water-proof use, please use water-proof connector or cable gland.
- Keep the cable entry airtight by using water-proof cap in case it is contemporary installed outdoor without using water-proof connector or cable gland.
- Power entry standard: PF1/2
Rating
| oltage (V) |
non-inductive load (A) |
inductive load(A) | |||||||
|---|---|---|---|---|---|---|---|---|---|
| resistance load | lamp load | inductive load | motor load | ||||||
| normal shut | normal open | normal shut | normal open | normal shut | normal open | normal shut | normal open | ||
| AC | 125 | 10 | 3 | 1.5 | 10 | 5 | 2.5 | ||
| 250 | 6 | 2 | 1 | 10 | 3 | 1.5 | |||
| 480 | 2 | 1.5 | 0.8 | 3 | 1.5 | 0.8 | |||
| DC | 8 | 10 | 6 | 3 | 6 | 6 | |||
| 14 | 10 | 6 | 3 | 6 | 6 | ||||
| 30 | 6 | 4 | 3 | 4 | 4 | ||||
| 125 | 0.8 | 0..2 | 0.2 | 0.8 | 0.2 | ||||
| 250 | 0.4 | 0.1 | 0.1 | 0.4 | 0.1 | ||||
| Inrush Current | normal shut | maximum 20A |
|---|---|---|
| normal shut | maximum 10A | |
| Ambient Operating-temperature Range | -10~+70℃(Not freezed) | |
| Ambient Operating-humidity Range | under 95%RH | |
- *Remark)
1.Upper cost is based on the normal current.
2.inductive load rate is over 0.4(an alternating current),under 7ms(a direct current)
3.lamp load has 10 times inrush current.
4.motor load current has 6 times inrush current.
Circuit system
| Contact Point | 2CKT-DB(double 2 circuits) |
|---|
Reviews
There are no reviews yet.